کد کالا : SP-LMS-101
ساخت : Sepahan Oil Co
اصالت کالا : original
مشخصات کلی : Locomotive Speedy Sepahan
Locomotive Speedy oils are premium, heavy-duty, crankcase lubricants intended mainly for railroad diesel engines. They do not contain zinc and therefore can be used in EMD engines fitted with silver piston-pin bearings. They are also designed for engines subjected to the most severe operating conditions, especially where fuel sulphur content is high and where long oil drain intervals are required.
Applications:
- Railroad diesel locomotive engines of Electromotive Division (EMD) and General Electric (GE)
- Marine and stationary engines for power generation or off-shore drilling requiring zinc-free oils
- Locomotives with silver bearings
- Light-duty diesel generators
Features & Benefits
- Zinc-free formulation protects silver bearings against corrosion
- Excellent in-service retention of TBN facilitates extended drain intervals
- High oxidation stability minimizes sludge and deposit formation
- Viscosity retention under severe operating conditions
- Excellent detergency/dispersancy provides superior engine cleanliness
packaging
Drum (208 lit)
storage
- Storing lubricants preferably indoor and if not possible, outdoor under cover away from direct sun light and rain and snow falls will maximize lubricant life time.
- Avoid temperature fluctuations, maintaining storage temperature around 25 ? will be of great help to lubricant quality protection
- This product is stable in ambient conditions, non-corrosive and can be stored in mild steel containers
Safety, Health and Environment
This product is stable in ambient conditions and is practically non-irritating to skin and eyes.
Avoid prolonged and repeated skin contact with used lubricants.
In case of skin contact, wash with soap and water
Avoid environmental pollution. Return used lubricants to collection centers.
EMD |
GM |
Generation 4 & 5 |
LMOA |
Generation 4 Long Life |
G.E. |
CF |
API |
3660 |
Caterpillar |
Locomotive Speedy Specification Performance Level ( GM: EMD ) |
||||
Result |
Test Method |
Unit |
Property |
|
15W40 |
40 |
- |
- |
SAE |
15 |
15 |
ASTM D-445 |
mm2/s (cSt) |
Kinematic viscosity at 100°C |
127 |
98 |
ASTM D-2270 |
- |
Viscosity index (VI) |
895 |
905 |
ASTM D-4052 |
Kg/m3 |
Density at 15.6 °C |
220 |
260 |
ASTM D-92 |
°C |
Flash point |
-33 |
-9 |
ASTM D-97 |
°C |
Pour point |
17 |
16 |
ASTM D-2896 |
mg KOH/gr |
Total Base Number (TBN) |